Sage Error 1020 Access Denied

An issue with the Cloud flare proxy can cause Sage 50 Error 1020: Access Denied on websites. Your request has been denied because of what this means—you have broken a firewall rule. When the CDN notices that an IP address tries to connect to a website, it marks the IP address as being prohibited in the internal settings. Due to the risk the CDN sees for the site, it refuses to permit the connection. Sage Error 1020: Access Denied can be resolved by checking the DNS settings. Thus, read the complete article to explore more about the Sage Error 1020.

Causes of Sage Error 1020 Access Denied

The primary reasons behind the occurrence of Sage Error 1020 Access Denied is damaged or missing files in the data path.

The other factors are also responsible for the error are listed down:

  • There is little to no space available on a network drive.
  • There is no connection to the network drive.
  • A folder with incorrect security or permissions has been shared
  • Administration rights are not required to execute the software.
  • It has been installed with many Software Versions.
  • Workstations and servers both fail to respond to ping attempts.
  • On the workstation’s server, User Account Control is enabled.
  • files in the data path that are damaged or missing files
  • An older backup file was used to copy the entirety of the Organization Folder.

Need Expert Help: Are you getting Sage Error 1020 Access Denied and don’t know how to solve it? In that case, you must get immediate help from our Sage Live Chat experts by dialing the ReConcileBooks.com helpline number at any time.

How to Fix the Sage Error 1020 Access Denied?

Here are the multiple methods to fix the Sage Error 1020 Access Denied:

Method 1: Modify the Permissions to the Peachtree 240.ini File

  • Go to the following path on your computer: C:/ Common Files/Program Files (X86)/Peach
  • Perform a right-click on the file called Peachtree240.ini
  • Select the Properties tab followed by selecting the advanced from the Security tab
  • Select Edit from the Owner tab
  • Choose the username after clicking the “Change Owner” button, and then click “Apply
  • To close each screen, click the message that is being displayed and then select the “Close” button
  • Choose the “Change Permissions” tab
  • Select Users (Users/computer name) then click Edit
  • Give the users full control and then click on the “Ok” button
  • Follow the same procedures as administrators and System
  • To close each screen, click on the “Ok” button.

Read this article: Sage 50 2022 Install Windows 11

Method 2: Verify the DNS Settings

  • To make the run command visible, the server’s Windows Key + R keys from your keyboard
  • Type CMD and then click on the Ok button
  • After that, Ipconfig must be entered, then hit the Enter key.
  • Keep your IPv4 address in mind
  • Press enter after entering the host rename
  • Go to the workstation and keep the computer’s name in mind
  • Repeat the above steps
  • Once done with that, type Ping followed by the Enter key
  • Make that the server at the aforementioned IP Address responds to the Workstation
  • Go back to the server and enter the computer name for the workstation there
  • Until the DNS issue is resolved, add a hosts file to the problematic system.

Read also: Sage 50 Error Code 3

Method 3: Edit the File in a Different Location

  • It is necessary to relocate the INI file to a new location before editing it
  • INI File should be placed on the Windows desktop
  • Make the necessary adjustments, then save them
  • The INI File Editing Process:
  • For 64-bit computers (for Releases 2018 and prior)
  • The shared Sage 50 folder must be created as a mapped disc on the new server
  • Open the Common Files folder at C:Program Files (x86)
  • Peach and open the PeachtreeXXX.ini
  • It is necessary to adjust the Data path = to the new mapped directory
  • Select File >> Save, and then Close button to exit the INI file.

If you have any specific query, also get in touch with the experts of Sage 50 Live Chat 24×7.

Method 4: Uninstall and Reinstall the Sage 50 Accounting Software

The Final step is to Uninstall the Sage 50 Accounting Software and then Reinstall it. 

  • Browse to C:/ Common Files/Program Files (X86)/
  • Rename to Peach old from the peach folder
  • Reinstall Sage 50 Accounting Software
    • If you have the Sage 50 Accounting installation CD, please put it in your DVD/CD drive
    • Click the installer file by double clicking if you have downloaded Sage 50 software
    • You can find the file for your server by navigating to the Sage 50 download folder if an older version of Sage 50 downloaded the update automatically to your workstation:
    • The following path: C:\Users\Public\Documents\Sage Software\Simply Accounting\Download
    • exe should be copied to your server, where it may then be executed
    • To run a file, look for it in Windows and click it
    • All presently accessible downloads and supported versions of Sage 50 Product and Payroll Updates
    • According to your computer’s settings, you might get a message asking you “Do you want to enable the following program to make changes to this computer?”
    • Choose “Yes” to proceed
    • Start the Sage 50 Accounting Install Shield wizard:
    • Choose Next to proceed
    • To begin the installation process, select Install Sage 50
    • Choose your language, then click “Ok” to continue
    • If you want to continue installing Sage 50, you may be prompted with the following question
    • To proceed with the installation, select the “Yes” button
    • You will see a prompt asking if you want Windows Firewall to be automatically configured to work with Sage 50 if Windows Firewall is enabled on this machine
    • Select “Yes”, you can set up your firewall automatically
    • Pick the installation type you want:
      • Choose Advanced, then Server Only to install only the connection manager on the machine that will function as your server and won’t be used by Sage
      • If you intend to use Sage 50 on this PC, select Typical to proceed
    • If Sage 50 is already installed on your computer and you are eligible to upgrade to the newest version:
      • In case the computer is linked to the internet, the installation will immediately retrieve the activation codes
      • To activate manually and then input your serial number, choose No thanks instead of Next if you wish to proceed automatically
    • Please read and pick, if you want to go ahead and install the software, I agree to accept the conditions of the license agreement
    • The process of installation is initiated by the install Shield
    • At the conclusion of the installation process, a window will appear to indicate that everything was successful
    • Select the “Finish” button once you’re done, close Sage 50 and end the installation.

Visit here: Sage 50 Error Code 1721

Conclusion

With this solution, we end this article and hope that it will be helpful for you in resolving the Sage Error 1020 Access Denied. If in case you’re unable to resolve this error then you can feel free to connect with Team of Experts via Sage Helpdesk Team. The team will dedicatedly be committed to serving your doubts all round the clock.

Frequently Asked Questions !

What do you Understand with Cloud Flare Proxy? 

A content delivery network is Cloud flare. Due to the fact that they address a significant issue with latency, CDNs are becoming an increasingly common paradigm on the internet. They offer what is referred to as an edge network, at least in the case of Cloudflare. In other words, an edge network establishes a much more localized entry point for data as opposed to relaying it between servers all over the world. 

Why Should you use Cloud Flare in your System?  

There are a few benefits to using a network like Cloud flare, the most obvious of which being the possibility for speedier content load times. Additionally, you receive increased security and defense. Cloud flare can lessen bot activity, mitigate a DDoS attack, and stop comment spam. Due to the way it distinguishes between legitimate and malicious traffic, it can defend your online presence and uptime in the case of a DDoS attack.

Can We Remove Sage Error 1020 Access Denied by Updating your Windows?  

Yes, you can try to resolve the Sage Error Code 1020 by using the below Windows update steps:

  • Initially, press the Windows Start button
  • Next, move to the Settings
  • Select the Windows Update tab now
  • Choose “Check for Updates” from the menu
  • You’ll see the available update on your screen
  • At last, install it by selecting and clicking.
Tags: , , , ,

Leave a Comment

Phone

+1-347-967-4079